Comp-cams 2011+ 5.0L Ford 4v (Coyote) Camshaft Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Comp-cams 2011+ 5.0L Ford 4v (Coyote) Camshaft. COMP Cams 2011+ 5.0L Ford 4v (Coyote) Camshaft User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 10
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
1
COMP Cams®
3406 Democrat Rd.
Memphis, TN 38118
Phone: (901) 795-2400 Fax: (901) 366-1807
www.compcams.com
Part #COMP4-145
Revised 4/11/11
Important Installation Note:
Specialty Parts & Tools Required;
1) COMP Cams® VCT Limiters (#5493)
2) Crankshaft Turning Socket (COMP Cams #4793)
3) 1 ½" Open End Wrench
4) Vise
5) Torque Angle Gauge
6) 10mm Socket (12 point)
Replacement Bolts Needed;
There are many torque-to-yield bolts that should not be reused during this installation. It is a good idea to have the
replacements on hand before starting the installation process!
To order them from a dealership you will need to order the following bolts;
1) N806183-S437 – Camshaft main cap bolts, 40 needed (10 for each camshaft being installed)
2) BR3Z-6279-A – Camshaft bolts, 12 needed (3 for each camshaft)
3) BR3Z-6A340-A – Crankshaft pulley bolt
2011+ 5.0L Ford 4v (Coyote) Camshaft Installation Instructions
Thank you for choosing COMP Cams® products; we are proud to be your manufacturer of choice. Please read
this instruction sheet carefully before beginning installation, and also take a moment to review the included
limited warranty information.
Camshaft Removal Preparation
1.
Prepare a clean work area and assemble the tools needed for the camshaft installation. It is suggested to
use an automotive manual to help determine which items must be removed from the engine in order to
expose, remove, and reinstall the timing chains, camshaft actuators/phasers, and camshafts. A good,
complete automotive manual will save time and frustration during the installation.
2. Disconnect the negative post of your battery.
3. Remove any coil covers from the engine.
4. Unplug the coils and loosen the bolt holding them into the valve cover, pull the coils out. Then remove
the Variable Cam Timing (VCT) actuator electrical connectors from both banks of the engine.
5. Remove the valve covers from both sides of the engine.
INSTRUCTIONS
Vue de la page 0
1 2 3 4 5 6 7 8 9 10

Résumé du contenu

Page 1 - INSTRUCTIONS

1 COMP Cams® 3406 Democrat Rd. Memphis, TN 38118 Phone: (901) 795-2400 Fax: (901) 366-1807 www.compcams.com Part #COMP4-145 Revised 4/11/11 Import

Page 2

10 COMP Cams® 3406 Democrat Rd. Memphis, TN 38118 Phone: (901) 795-2400 Fax: (901) 366-1807 www.compcams.com Part #COMP4-145 Revised 4/11/11 Warran

Page 3

2 COMP Cams® 3406 Democrat Rd. Memphis, TN 38118 Phone: (901) 795-2400 Fax: (901) 366-1807 www.compcams.com Part #COMP4-145 Revised 4/11/11 6. Rem

Page 4

3 COMP Cams® 3406 Democrat Rd. Memphis, TN 38118 Phone: (901) 795-2400 Fax: (901) 366-1807 www.compcams.com Part #COMP4-145 Revised 4/11/11 12. Rem

Page 5

4 COMP Cams® 3406 Democrat Rd. Memphis, TN 38118 Phone: (901) 795-2400 Fax: (901) 366-1807 www.compcams.com Part #COMP4-145 Revised 4/11/11 20. On

Page 6

5 COMP Cams® 3406 Democrat Rd. Memphis, TN 38118 Phone: (901) 795-2400 Fax: (901) 366-1807 www.compcams.com Part #COMP4-145 Revised 4/11/11 Left Ba

Page 7

6 COMP Cams® 3406 Democrat Rd. Memphis, TN 38118 Phone: (901) 795-2400 Fax: (901) 366-1807 www.compcams.com Part #COMP4-145 Revised 4/11/11 Right B

Page 8

7 COMP Cams® 3406 Democrat Rd. Memphis, TN 38118 Phone: (901) 795-2400 Fax: (901) 366-1807 www.compcams.com Part #COMP4-145 Revised 4/11/11

Page 9

8 COMP Cams® 3406 Democrat Rd. Memphis, TN 38118 Phone: (901) 795-2400 Fax: (901) 366-1807 www.compcams.com Part #COMP4-145 Revised 4/11/11

Page 10 - Warranty

9 COMP Cams® 3406 Democrat Rd. Memphis, TN 38118 Phone: (901) 795-2400 Fax: (901) 366-1807 www.compcams.com Part #COMP4-145 Revised 4/11/11

Commentaires sur ces manuels

Pas de commentaire